Home arrow Products arrow PoSwitch

Room Manager

Room Manager

daisy-cd.jpg 

The room manager is an independent control system responsible for managing heating lighting and other electrical appliances in a room.

It is aware of your presence, observes the ambient temperature and lighting, and sends commands to the smaller modules through the powerline network. It can also communicate with other room managers within the house, to synchronize the effort to serve you better

There are two models available,

  • Daisy (RSM101) is ingénovie's first room-manager.   Not bigger than a compact disk, she sits simply on a desk, coffee table, or where ever you wish in the room. 
  • Wally (RSM102) is the wall-mount version, suitable for permanent installation
Read more...

PoSwitch

 PoSwitch

poswitch.pngPoSwitch is a small relay module designed to replace the cable outlet that powers up the wall electric heater.

It can also be used to control an air-conditioner unit, or other large electrical appliances, like a washing machine, or a dishwasher.  

The PoSwitch module can communicate to the room manager using power line networking.

You can control the heater power level from the room manager.

As with other modules you can also connect the PoSwitch to any applications running on the room manager...


 

Read more...

LiSwitch

LiSwitch

lsw-101-320.pngLiSwitch is a small dimmer module, in the form of an extension cord. Just plug a lamp on one end, and plug the other end to an electric outlet. 

You can connect just about any type of lamps or small electrical devices to the LiSwitch, and it will be immediately manageable from the room manager.

Moreover, if you connect an incandescent lamp, then the LiSwitch can also do the dimmer function. 


 

Read more...

Rémo-V

remov_anim_200.jpg 

Rémo-V

Relay module for rolling-shutter   

Rémo-V is a relay module to control a rolling-shutter motor, or other domestic motorization.

  • Closes the shutter during your absences, and at night time, to enforce the security of the house.
  • Energy Saving: a window with shutter closed can reduce heat loss up to 60%.
  • Equiped with anti-blocking system, to ensure proper closing of the shutter.
  • The manual command using wall-switch remains available, and memorized for the next opening.
Read more...

Rémo-C

remo-c.png

Rémo-C

RMC-101

programmable relay module
to control a furnace,
air-conditionners, houshold appliances,
or other electrical loads
according to your presence
in a Room-Service
Home Automation System.

Fiche Produit - Rémo-C RMC101 Fiche Produit - Rémo-C RMC101

Read more...

Biberon

Biberon 

biberon_021-200.jpg

We name it Biberon (french for baby bottle) because this little card allows you to feed your room manager with new functionalities and make it more intelligent.

You can upgrade embedded software of the room manager using this card and a PC with USB port. The software downloader and latest software releases are available on our download section. 

The biberon (infrared baby-feeder) is now available in our online shop.


 

Read more...
E-mail

PoSwitch

Power Switch Module

poswitch_duo.jpgPoSwitch is a small relay module designed to replace the cable outlet that supplies electricity to appliances such as electric heater, air conditioner or others  

It can communicate with a room manager through the existing electrical installation (power line carrier network).

The PoSwitch module can control the power consumption of a heater connected to it by varying the on-off cycle. You can set the power level from the room-manager.

And like other modules, you can link the PoSwitch to any applications running in the room manager, for example to the "Preheat" function on the "Morning-Call" application.

 

Features

  • Replace cable outlet, fits into flush-mount round mounting box of 60mm diameter, 30mm depth.
  • Switch up to 3600W (16A) loads, such as electric heater, air conditioner, etc.
  • Power Cycling function, with 16 levels of duty cycle, to control heating power level.
  • Communicate to the room manager via the powerline network. 

Installation

psw_install.jpgPoSwitch is designed to replace the cable outlet of an electrical heater.

Unhook the electrical heater from the wall, and simply replace the cable outlet with the module.

Follow the installation manual.poswitch_wallblue_002.jpg

 
< Prev   Next >

Login






Lost Password?
No account yet? Register

New Software: AnyTime : Programmable Timer / Scheduler

Available in version 2.1.6 to feed with infrared-biberon into your room-manager.  AnyTime is a new software for programmable timer / scheduler to&nb...
Read More ...

New Product! Rémo-C Relay Module

Rémo-C : A small module that does it all! The latest member of Ingénovie's home automation system, Rémo-C is a small programmable relay module to control various electrical applia...
Read More ...

Control your house from Internet and Mobile Phone

From your office, from the station or in your car; from Internet or on your mobile phone,... During your absent, you can access your room-manager from anywhere, to manage and watch your home remot...
Read More ...

Room Service Brochure

Imagine...   Waking up in the morning, with a soft warm light that rises up slowly like a sunrise. A while before the alarm rings, ...
Read More ...

Remo V - Relay Module for motorised shades/blindes

We listen to your requests! Democratically, you've expressed your wish to have the rolling shutter / shades managed by the room manager. (28.8% winter polls 2007) Y...
Read More ...
Pack 3 rooms
Pack 3 rooms
€1 499,00
Add to Cart


Daisy
Daisy
€399,00
Add to Cart


LiSwitch
LiSwitch
€50,00
Add to Cart


Eco-pack 3 rooms
Eco-pack 3 rooms
€599,00
Add to Cart


PoSwitch
PoSwitch
€50,00
Add to Cart


Polls

Which new application would you like to have (downloadable) on Daisy/Wally?
 

Newsletter

New products, new technologies, and all new entries in our shop.

Nouveaux produits, nouveaux technos, et toutes les nouveautés dans notre boutique.